Description

• Complies with Planning Guide for Accessible Restrooms.
• Seat is constructed of durable, water-resistant, white-colored 3/8″ (9mm) thick solid phenolic.
• Frame and swing down legs are 1″ (25mm) zinc plated tubing with 1/8″ (2.7mm) white vinyl antibacterial coating.
• Supports up to 1102-Lbs., (500 kg) when properly installed.
• Seat 31.5″ wide, projects 22 5/8″ from wall.
• **PLEASE NOTE: This model is NOT reversible. Check to make sure you have the correct Left or Right Seat before ordering.

SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. Unit shall support static loads of up to 1102-Lbs (500 kg) when properly installed and used. To avoid potential seat malfunction, Do NOT use seat if weight exceeds 1102-Lbs (500 kg).

*See Technical Data Sheet below for full description.

Technical Data Sheet: B-918116

Warranty PDF